34
35
ENGLISH
5. ASSEMBLY INSTRUCTIONS
STEP 4
37L
41L
12
106
48
44L
43
84
25
46
25
47
42
39 38 37R
20
44R
38 39
42
37R
37L
41R
46
47
48
85 5 4
106
84
1.
Attach the footplate support bars (41L& 41R)by sliding them onto the footplate bolt of
the lever connection. Secure each side with 1 set of Allen head screws (4), spring wash-
ers (5) and flat washers (85). Tighten securely and then attach the end cap (84) with one
screw each (106).
2.
Attach the footplate support bars (41L& 41R) to the swivel rods (25). Secure with 1 set of
Allen head screws (42), flat washers (39) and nuts (38) each. Tighten fully.
3.
Attach the plastic covers (37L & 37R) to the footplate support bars (41L&41R). Secure with
2 sets of screws (12 and 20) each.
4.
Attach the footplates (44L& 44R) to the footplate support bars (41L& 41R). Secure with
4 sets of Allen head screws (43), flat washers (46), spring washers (47) and knurled-head
screw (48) each. Tighten the knurled-head screws securely with your hand.
5. ASSEMBLY INSTRUCTIONS
STEP 5
9
8
3L
4
5
23
19
3R
8
25
5 9
8
1.
Install the bars (3L+3R) on the swiveling rods (24L, 25R). Secure with 4 sets of Allen head screws (9),
spring washers (5) and waved washers (8).
2.
Install the fixed handlebar (19). Secure with 2 sets of Allen head screws (4), spring washers (5) and
waved washers (8). Guide the hand pulse cable (23) along the handlebar (19) through the hole in
the handlebar post (29) all the way to the upper opening in the computer mount.
SP-ET-9800-iE-IM-DE+GB+FR-05.indb 34-35
10/6/2016 2:22 PM
