7. ACCESS TEST
7
With keys in hand, close and lock the door.
PLACE AND HOLD
the
PROGRAMMED
finger
pad on scanner, indcator ring will flash white
1 time and beep 1 time to alert scanner is
activated.
If fingerprint is accepted,
indicator ring will
illuminate green. You now have access to your
safe.
If fingerprint is rejected
, the indicator Ring
will flash red 5 times and beep 5 times.
GREEN LED = SUCCESS!
*Now that your fingerprint is successfully programmed, re-install the magnetic branding
badge and store your backup keys in a secure secondary location outside of the safe.
8. PROGRAMMING ADDITIONAL FINGERPRINTS
INDIVIDUALLY MAPPING ALL
ZONES OF YOUR FINGERPRINT
WILL ENSURE A RELIABLE
READING BY THE SCANNER.
To ensure each programming
sequence is properly captured, the
scanner needs to read the exact
same place on your finger four
times in a row.
This counts as one programmed
fingerprint of the 100 fingerprints
this unit can keep in memory.
Once programming sequence has
been successfully completed you
can move onto the next zone of
your fingerprint.
TIP
RIGHT
TOP
MIDDLE
LEFT
When accessing your safe quickly, there is a chance you might press
the scanner with a part of your finger that you have not registered before.
For this reason, we recommend programming additional areas of your
fingerprint to ensure fast and reliable entry to your safe.
