9
4.
Plug lock face cable into the
back of the lock face. The
cable will only be able to fit
one way.
2. The lock face requires 1x9V
alkaline battery. Locate the
battery compartment on
the back of the lock face.
Insert the battery in the
proper orientation. Lock face
will beep when batteries
are successfully installed.
WARNING: The batteries must be
inserted with the correct polarity.
Exhausted batteries must be removed
from the product and discarded safely.
Do not mix old and new batteries. Do not
mix alkaline or standard (carbon – zinc)
batteries. Do not use rechargeable
(nickel – cadmium) batteries.
1. Remove lock face from box
located inside of safe.
3.
10. LOCK FACE INSTALLATION
Align the lock face to the
backer plate, with the lock
face slightly rotated to the
left. Turn clockwise until you
feel the lock face click into
place. Once the lock face has
been installed, locate the
remaining handle spokes
inside of the safe. Insert each
individual spoke into a
threaded opening and turn
clockwise to install.
St
ep 3
St
ep 2
St
ep 1
BACK OF LOCK FACE
FRONT OF LOCK FACE
9V BATTERY
St
ep 4
8
#
1
2
3
4
5
6
7
*
9
0
8
#
1
2
3
4
5
6
7
*
9
0
