St
ep 4
4. While the safe door is still open,
confirm your newly entered security
code. Wake up the keypad by swiping
the keypad with your finger(s). Then
enter the 3-8 digit code followed by
the [ # ]. If successful you will hear
two beeps and the green light will
illuminate, allowing you to retract
the bolts.
Customer Service - (888) 792-4264
12. LOCKED OUT OF YOUR SAFE
In the event you have forgotten the security code your primary action will be to use
your backup keys in order to gain access to your safe and follow the Lock Face Security
Setup Code instructions, starting at step 2 of activating the brass reset button.
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to obtain keys.
Always remember to SWIPE your finger(s) across the surface of the keypad to wake
the keypad in order to enter the keypad codes. Simply touching the keypad may not
trigger a sensor point on the key pad to activate keypad.
Note: Do not shut the safe door until you have confirmed your new security code
at least 3 times to ensure your code has been saved and you can open the door
successfully. If the code fails, the yellow (left) light will flash and beep. Repeat the
steps above until successful.
WARNING: If the incorrect security code is entered 3 times you will have an
automatic lockout for 30 seconds before you can enter your code again. If 3
additional failed attempts are made, the keypad will lockout for 5 minutes. Leave
batteries in to go through lockout cycle. If batteries are removed the timer will
restart zero.
11. LOCK FACE SECURITY CODE SETUP (Continued)
8
#
1
2
3
4
5
6
7
*
9
0
11
Green = Successful Entry
