13. ANTI-THEFT ALERT SYSTEM
14. INTERIOR LIGHTING
Battery Holder
AA
AA
AA
AA
St
ep 1
1.
2.
3. The alarm requires 4 x AA
alkaline batteries. Locate the
battery compartment on the
inside of the door panel. Insert
the batteries in the proper
orientation and order. Keypad
will beep when batteries are
successfully installed. Replace
battery cover.
You are receiving the safe with the theft alarm system fully
activated. If the safe is tampered with, or the keypad receives
too many incorrect attempts at entry, the alarm will sound.
To immediately stop the alarm from sounding, you must first
gain access to your safe. Enter your security code which will
automatically silence the alarm or use your manual override
key to gain access to the safe and remove the alarm batteries
located on the interior of the door.
To deactivate the alarm function press (*99) on the keypad.
To reactivate the alarm functions if deactivated, press (*00) on the keypad.
12
The alarm system also comes with a lockout timer to prevent unauthorized
entry. 3 consecutive incorrect entries will cause your keypad to enter basic lockout
mode, locking the keypad for 30 seconds paired with a 30 second alarm. 5 incorrect
consecutive entries will cause the keypad to enter severe lockout mode, meaning
the keypad will remained locked out for 5 minutes as well as a sounding alarm for
2 minutes.
This safe comes with motion activated interior lighting installed. When the safe is
plugged into a power source and USB connection of the lighting system is plugged
into the internal power receptacle, the lighting will function automatically. When
powered on, motion will activate the system and turn on the interior light which
will remain on for 30 seconds. Lights will be activated for an additional 30 seconds
upon sensing any movement.
WARNING: The batteries must be inserted
with the correct polarity. Exhausted batteries
must be removed from the product and
discarded safely. Do not mix old and new
batteries. Do not mix alkaline or standard
(carbon – zinc) batteries. Do not use
rechargeable (nickel – cadmium) batteries.