background image

11

13. LOW BATTERY WARNING

Red = Low Battery

This E-Lock is equipped to alert you when the batteries 

are low by illuminating the red light (center) when any 

button is pressed on the keypad. Please replace batteries 

immediately when receiving this warning.
Always test the batteries when installing or replacing. 

If the red light comes on when a button is pressed you 

know the batteries are not fully charged. 

Battery Holder

AA

AA

AA

AA

 

St

ep 1

3. The alarm requires 4 x AA 

alkaline batteries. Locate the 

battery compartment on the 

inside of the door panel. Insert 

the batteries in the proper 

orientation and order. Keypad 

will beep when batteries are 

successfully installed. Replace 

battery cover.

The alarm system also comes with a lockout timer to prevent unauthorized 

entry. 3 consecutive incorrect entries will cause your keypad to enter basic lockout 

mode, locking the keypad for 30 seconds paired with a 30 second alarm. 6 incorrect 

consecutive entries will cause the keypad to enter severe lockout mode, meaning 

the keypad will remained locked out for 5 minutes as well as a sounding alarm 

for the duration.

WARNING: The batteries must be inserted 

with the correct polarity. Exhausted batteries 

must be removed from the product and 

discarded safely. Do not mix old and new 

batteries. Do not mix alkaline or standard 

(carbon – zinc) batteries. Do not use 

rechargeable (nickel – cadmium) batteries.

 

12. ANTI-THEFT ALERT SYSTEM

1.
2.

You are receiving the safe with the theft alarm system fully 

activated. If the safe is tampered with, or the keypad receives 

too many incorrect attempts at entry, the alarm will sound.
To immediately stop the alarm from sounding, you must first 

gain access to your safe. Enter your security code which will 

automatically silence the alarm or use your manual override 

key to gain access to the safe and remove the alarm batteries 

located on the interior of the door.

To deactivate the alarm function press (*99) on the keypad.
To reactivate the alarm functions if deactivated, press (*00) on the keypad.

1 2 3 4
5

8

7

6

#

0

9

*

Summary of Contents for PRESERVE Series















Reviews: