1. To maximize burglary protection and stability, securing the vault to the floor or
wall stud is recommended.
2.
3.
Always ensure the vault is in an isolated and dry area. Never place the vault in
direct contact with a wet floor. When installing your vault on a concrete floor,
use of a moisture/protective barrier is highly recommended. Failure to do so,
or exposing the vault to chemicals or other adverse environments, may void the
warranty.
SA Consumer Products recommends that you store your vault in a closet, office,
basement, bedroom or any other location that is convenient for you but out of
direct line of sight from prying eyes.
10. PROPER PLACEMENT AND MOVING OF VAULT
8
11. SECURING YOUR VAULT
SECURING YOUR VAULT WITH PROVIDED CABLE
1.
St
ep 1
St
ep 2
2.
A security cable is included with
your vault. To secure the cable
around a fixed object, first loop
the cable around the object as
shown in the figure to the right.
Insert the cable’s metal peg end
into the hole on the side of the
vault while still open.
3.
From the inside of the vault, take
the cable clip and push it over the
metal peg until fully secured. Use
pliers if needed.
Locking the vault with the cable loop inside will secure the cable inside the vault. Check
the loop to ensure their is no way it can be manipulated to be easily removed from the
fixed object before leaving unattended.
SAFE
INSIDE
CABLE
CLIP
INSIDE OF VAULT,
PUSH CLIP OVER
END OF CABLE
