12. LOCKOUT MODE / TAMPER PROTECTION
13. SILENT ENTRY MODE
To initiate silent entry mode, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on, but will not beep,
indicating you are now in silent entry mode.
You will not hear any sounds for any functions
while the vault is in silent entry mode.
To turn the sound back on, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on and will beep once
indicating you are no longer in silent entry mode.
This E-Lock is equipped to alert you when the batteries are low by illuminating
the low battery icon on the keypad .
After a successful entry, the LED will flash 10 times signaling vault is in low
battery mode, replace batteries immediately to avoild being locked our of your vault.
11. LOW BATTERY WARNING
Low Battery
11
1. Three consecutive incorrect code entries will
put the vault in “Basic Lockout” mode. Scanner
is deactivated for 30 seconds.
2. After “Basic Lockout” mode has ended, another
three consecutive incorrect code entries will
result in “Severe Lockout” mode. Scanner is
deactivated for 5-minutes.