8
8. TROUBLE SHOOTING
7. PROGRAMMING ADDITIONAL FINGERPRINTS (CONTINUED)
Press the reset button and follow
Section 5 instructions again, for
each fingerprint zone you would
like to program.
If you experience any problems
reading your fingerprint, including
inconsistent readings, note the
area of your fingerprint that
doesn’t work properly, and
specifically re-program that area.
This scanner will hold up to 100
unique fingerprints.
BEEP
BEEP
BEEP
HOLD FOR BEEP
LIFT FINGER
2 BEEPS + GREEN LIGHT = SUCCESS!
In the event that you run into issues with programming and accessing your
vault, please read through this section for answers to your questions.
Placing a portion of a fingerprint on the scanner that has
not been programmed can result in an error. We
recommend programming multiple areas of each
fingerprint.
Make sure batteries are fresh. We suggest high grade
alkaline. Do not mix old and new batteries. No not use
rechargeable batteries.
Make sure you are placing the same part of your finger
print on the scanner that you use for programming. If not
make not of the area that is not scanning and program
that area specifically.
SOLUTION
PROBLEM
YOUR PROGRAMMED
FINGERPRINT IS NOT
READING AT ALL TIMES
