Battery
Compartment
(4) AA
Reset Button
LED Light
11. SILENT ENTRY MODE
10. CLEARING ALL PROGRAMMED FINGERPRINTS
10
HOLD DOWN THE
RESET BUTTON
x
2
x
2
GREEN
LIGHT
NOTE:
If 100 max fingerprints have already been programmed
indicator ring will flash 5 times
and beep 5 times. We recommend clearing all programmed fingerprints and starting the
programming process over.
To initiate silent entry mode, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on, but will not beep,
indicating you are now in silent entry mode.
You will not hear any sounds for any functions
while the vault is in silent entry mode.
To turn the sound back on, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on and will beep once
indicating you are no longer in silent entry mode.
Hold Reset button. Initially, you
will hear one beep. Continue
holding reset button for 5
seconds, the indicator ring will
flash green two times and beep
two times.
