background image

30

OPERATION  

User Preferences & Component Versions (Cont.)

PROGRAM TIME LIMIT

The display will show “ TIME LIMIT - YES” or “TIME LIMIT - NO”, press ▲/▼ key 

to turn this function On/Off. Press ENTER to make your selection. When “YES” 

is selected, it will prompt the message of “TIME - XX:00” for you to set the time 

limit. Setting range is from 5:00 to 60:00, with a default value of 30:00. Press 

▲/▼ key to adjust the value. Press ENTER to confirm the setting.

Energy Smart setting

The timer range is 5 - 600 minutes with default timer of 30 minutes. When a 

timer is set, the console will shut power off when the timer is reached during idle 

mode. To set timer, the message display will show “ZZZ TIMER - xx MIN”, press 

▲/▼ keys to change the setting. If the timer is setting less than 5 minutes, the 

message will show “ZZZ TIMER - OFF” to de-activate this timer and the console 

will not get into energy smart mode at all.

LANGUAGE

a. The display will show the current country selected, such as “US”. 

  Note: After 4 seconds, it will display “XX MILE H>H” or “XX KM H>H”    

  (XX represents the country code)

b. Press ▲/▼ keys to change the country.

c. Press the ENTER key to confirm the selection.

 

TOTAL DISTANCE

According to the speed unit setting, total distance will appear as either “DIST 

– XXXXXX MILE” or “DIST – XXXXXX KM”, where XXXXXX represents a 

number. Press the ENTER key to view total time.

TOTAL TIME

Total time of use will appear as “TIME – XXXXXX HOUR”, where XXXXXX 

represents a number. Press the ENTER key to view display program version..

DISPLAy PROGRAM VERSION

The display program version will appear as “CTL SA_5 – XX”, where XX 

represents either letters or numbers. Press the ENTER key to view the drive 

board program version.

DRIVE BOARD PROGRAM VERSION

The drive board program version will appear as “DRV E875_AC - XX”, where XX 

represents either a letter or a number. Press the ENTER key to finish the review 

and return to Banner mode.

 

You may press and hold STOP key at anytime during this process to resent the 

console and back to Banner state.

Summary of Contents for E845 LED












































Reviews: