Attach the seat base to the handlebar mounting plate, using the screws and
washers provided. Insert the screws from underneath the seat--two in back and
two in front, through the handlebar mounting plate. Tighten the screws securely
(see Fig.4)
Attach the seat back adjustment handgrip to the seat back adjustment lever, using
the wrench provided. Also attach the water bottle/personal stereo holder to the
back of the seat, using the screws and washers provided (see Fig.5)
Attach the foot pedals to the crank arms on the cycle using the wrench provided.
Be careful to install the pedals on the correct crank arm. A"R" or "L" on the foot
pedal indicates the correct side. Install the pedal marked "R" on the right-hand
crank arm (as you stand at the rear of the cycle facing front). When you install the
pedal on the left hand crank arm, rotate the pedal counterclockwise to tighten
since the pedal has left-hand screw threads (see Fig.5). Tighten the pedals
securly.
(FIG.4)
(FIG.5)
6
Summary of Contents for 5002B
Page 18: ...Wiring Schematic 17...
