ASSEMBLING YOUR TREADMILL
3
Installation Requirements
List Of Parts
Read this owner's manual and follow the instructions contained herein.
Two persons are recommended to assemble the treadmill. To avoid back
strain, and to ensure safety to the unit and yourself, we suggest you avoid
lifting the running bed assembly from box. Instead lay the treadmill down,
drop the sides of the box and slide the treadmill from the container rather
than lifting it.
The packing for this treadmill was designed to protect it during
shipment, please store the original packing in a safe place in case you
need to ship the unit in the future.
Before assembling your treadmill, make sure that you have all following items:
Caution:
IMPORTANT:
1. Lift post:
Twelve 5/16"x 3/4" bolts
Twelve 5/16" washers
Twelve 5/16" nylon washers
2. Handlebars:
Four 5/16"x 4" bolts
Four 5/16" washers
3. Four lift post decorative caps
4. One set Infrared safety detector
Two Philip screws x L 5/16"
5. Rear end caps:
Two Philip screws x L 1/2"
6. One cup holder
7. One screw driver
8. One hex Allen wrench
9. One hex Allen wrench with handle
10.One combination wrench
11.Three fuses:
a. 15A (100V/120V) or 10A (200V/240V) - Electronics and motor
b. 4A-Incline system
c. 3A (100V120V use) or 2A (200V/240V use) - Drive board
4
