‧
‧
15
SYSTEM DEFAULT SETTING
1. Display Accumulated Distance:
In the "Banner" (before pressing any key), press
+
+ ENTER simultaneously
for 3 seconds, Window 1 & 2 display the total accumulated distance, a 6-digit
figure. The DISTANCE indicator eights up. After that if you press ENTER, the
TIME indicator lights up. The display shows up the total accumulated time.
Press ENTER to decide if you want to modify HRC setting.
2. Select MODIFY:
(1) "NO" is the pre-setting of MODIFY.
(2) Once in the default setting, "MODIFY HRC Y OR N" scrolls across the dot
matrix window, then "MDFY" appears.
(3) The HEARTRATE window shows either "NO" or "YES". Press
or
to
modify your choice, then press ENTER. The unit returns to the starting screen,
showing "C530". (Please refer to Page 21: 8-2 (a)&(b) for more details.)
▼ ▲
▲
▼
MODE
MODE
