TROUBLE SHOOTING
A. BLANK DISPLAY
If you turn on the POWER switch and there is no light, please follow steps to resolve
the problem.
(a) Check if the power cord is plugged securely into the wall socket. (See Fig. 10)
(b) Check that the power switch on the rare end of the unit is in the "ON" position.
The power switch should be lit.(See Fig. 10)
(c) If the power switch is not lit, replace the fuse (1A / 250V). Push on the fuse holder
and turn it counter clockwise to remove the damaged fuse. (See Fig.10-1)
Insert a new fuse into holder, push the fuse and holder into place, then turn the
fuse holder clockwise to secure it. (See Fig.10-2~10-3)
(d) If there is still no display after completing the above steps, please contact your
dealer for more information.
Fig.10
Fig.10-1
Fig.10-2
Fig.10-3
(To install a new fuse)
(To remove an old fuse)
REMOVE THE
DAMAGED FUSE
FUSE =
110V=1Amp,ACF
220V=1Amp,ACF
PDF created with pdfFactory trial version
