11
STEP 2
Install the Moving Parts (Continued)
(d) Separate the roller covers (A7). Snap them together into place on the
product. Then secure them with screws (21).
(e) On the left side of the product, remove the screw (22) from the stride
adjustment linkage. Place the stride adjustment linkage into place on
the bushing, and use the screw (22) to secure it into place. Then press
the stride adjustment linkage cover (11) into place. (Note: Carry out the
same procedure on the right side of the product as well.)
(f) Secure the stopper (12) to the front side of the glide rail on both sides of
the product.
Consult the manual and follow all assembly instructions carefully. Please
note that incorrect assembly may present a danger to the exerciser, will
damage the elliptical and void the warranty.
(f)
(e)
(d)
