15
STEP 6
Install the Pedals
Follow instructions (a) through (d) to install the pedals.
(a) Vertically split the right pedal (A2) with upper and lower halves, and then
remove the non-slip pads on it. Repeat the same step with the left pedal.
(b) Install the lower half of the right pedal (A2) at a tilt angle as shown below,
and then press it into place. Repeat the same step with the left pedal.
(c) Secure the lower half of the right pedal with screw (31), and be sure to se-
cure the screws in the rectangular frame shown in figure (c) first. Repeat
the same step with the left pedal.
(d) Align the upper half of the right pedal to the lower half, and secure them
with screw (32), then install the non-slip pads to the upper half of the right
pedal. Repeat the same step with the left pedal.
32
(b)
(a)
A2
A2
31
(c)
(d)
