38
OPERATION
User Parameter Setting(Continued)
(6) Product Serial Number
The Window will show the message of “S/N xxxxxxxx” (as shown below),
press <ENTER > and go to the next step.
※
The number “1234567” in the picture represents the machine serial
number.
(7) Language Setting
The window will show the options of the coutries, press
＜
RESISTANCE
+/-
＞
key to select your language, then press <ENTER > to confirm and
go to the next step.
(8) Time Limit Setting
The window will show the message of “LIMIT”, press
＜
RESISTANCE
+/-
＞
key or numeric keypad to set the time, then press <ENTER > to
confirm and go to the next step.
If the time limit is set less than 5 minutes, this function is deactivated. The
setting range is 5-60 minutes.
(9) PAUSE LIMIT Setting
The window will show the message of “PAUSE LIMIT”, press
<REor-> or numeric keypad to set the time, press <ENTER > to
confirm and go to the next step. The range is 2-60 minutes.
(10) Turn on/off the Buzzer
The window will show the message of “BZ”, press
＜
RESI/-
＞
key to turn on/off the buzzer, press <ENTER > to confirm and go back to
the start screen.
