Troubleshooting
Model: T621
Malfunction: The m
essage “SERVICE REQUIRED TREADMILL SHUTTING DOWN STOPPING” appears.
Possible cause: 1. The excessive heat protective function is activated.
Troubleshooting: 1. This message indicates that the motor is overheating.
Please turn off the unit and allow it to rest for one hour.
2. Inspect whether the motor thermal sensor is normal.
3. If the message appears often, the walk belt might require lubrication or be worn out. Lubricate or
replace the walk belt as needed.
4.
If these measures aren’t effective, replace the walk deck or motor.
3-10-1
Drive board
Display board
Temp
sensor
Motor
Temperature sensor
Tem
Temperature sensor wire connector
Summary of Contents for T621
