-28-
For home use, do not secure the safety key onto the product. Safety regulations require
that the safety key be detachable to prevent unsupervised product use of the treadmill
by children.
For light commercial use, the safety key can be secured to the treadmill to prevent the
key from being removed and lost. To do so, follow instructions in steps (a)-(e) on this
page and (f)-(h) on the following page.
(a) Use a Phillips screwdriver to remove screws from the safety key magnet case.
(b) Insert the safety key cord into the hole. Tie a knot in the end of the cord.
(c) Insert the knot as shown into the cavity of the plastic case.
(d) Put the other cord on top of the safety key cord as shown. Make sure cords are between
the screw holes.
(e) Secure the cover and screws.
Note: screws must fit flat against the cover.
(e)
(d)
(b)
(a)
(c)
STEP 8
Safety Key Cord Installation
