29
DISPLAy
Keys (Continued)
/ -
– iPod, iPhone analog audio volume adjustment. (Note: this is an
option feature and it is only compatible with Apple 30 pin connector.) MYE wireless
TV audio channel receivers volume adjustment.
(MyE Wireless TV Audio_
Channel Receivers and module not provided.)
CHANNEL
▲/▼ – Press this key to change MYE wireless TV audio channel
receivers channel settings.
(MyE Wireless TV Audio_Channel Receivers and
module not provided.)
DISPLAy
Safety Key
General information about Safety Key:
The safety key is meant to stop walk belt rotation if the exerciser stumbles
or falls. Always attach the clip to your clothes and set the magnet in place on
the console. When the magnet is not in place, “SAFETY KEY” will appear
on the message window. At this point, the safety key must be put into place
on the console to resume normal operation. If the safety key is removed
and then put into place when the walk belt is not rotating, the startup banner
screen will appear. If the safety key is removed and then put into place while
the walk belt is rotating, the workout will resume as follows: Time, distance,
and caloric expenditure values will remain lit; “PRESS SPEED UP” will ap-
pear on the display as a prompt to resume the workout.
6. OPERATE THE T635 LED TREADMILL
There are two ways to start operating this product: (1) Press the QUICK
START key, or (2) press the PROGRAM/GOAL SELECTION key to enter a
preset program. Using the QUICK START key allows you to begin exercising
immediately, without first entering user information.
OPERATION
Quick Start
1. Time, distance and calories will count up. If a workout time limit is
activated, time will count down, but distance and calories will count up
continuously.
2. Quick Start program will use default age of 35 year and weight of 165lb/75kg
for exercise expenditure calculation.
3. Both QUICK START and MANUAL LEDs are lit up to indicate QUICK
START program is in session. In QUICK START mode, the message
display will show “TREAD STARTING”, and it will count down from 3
seconds, and the walk belt will rotate at 0.2 kph/0.1 mph. The speed and
incline can be adjusted anytime during the program.
OPERATION
Start a Workout Program
To obtain more accurate calorie counts and target heart rates, operate the product
via a workout program as follows: