Note: If your treadmill is not equipped with the heart rate feature, the display will
not show the HR message in the MODE function.
2. DIST: Use the MODE key to select the DIST mode. When the DIST LED is lit in
the display, use the MODE
keys to adjust the desired distance. Each press of
the key increases or decreases the distance by 0.1 mile or 0.1 km. If you hold the
MODE
keys, distance will increase or decrease by 0.5 mile or 0.5 km.
3. TIME: Use the MODE key to select the TIME mode. When the TIME LED is lit in
the display, use the MODE
keys to adjust your desired time. Each press of
the key increases or decreases the time by 1 minute. If you hold the MODE
keys, time will increase or decrease by 5 minutes.
4. SCAN: The SCAN will alternate the display in the order of TIME
DIST
CAL
HR
TIME.
Note: There will be no HR readout if your treadmill is not equipped with the heart
rate feature.
SCROLL:
Using this key, you can choose between PRO1
PRO2
PRO3
PRO4
PRO5
Custom Interval
Custom Course
HRC 65%
HRC 80%
MANUAL.
Press the Scroll key until your desired program appears in the window.
STOP/ PAUSE/ Hold to Reset:
1. In MANUAL mode, pressing this key will stop the treadmill. When the treadmill is
stopped, hold this key for three seconds to reset the display, and all workout
information will be erased.
2. In PROGRAM/ INTV mode, if you press this key during your workout in PRO1~5,
Custom Interval, or Custom Course, the treadmill comes to a gradual stop and the
message window shows "PAUSE". All data remains and you can press the
SPEED button to resume your workout. Pressing the STOP key for three seconds
during your workout makes the display show the startup screen.
In the PAUSE mode, if you press the STOP key again, the display shows the
startup screen.
3. In HRC modes, pressing the STOP key during a workout stops HRC function; the
display shows the startup screen.
SAFTY KEY:
The safety key must be in place for the treadmill to operate. This safety device is
intended to stop the treadmill should a user stumble and fall. The display will show
"PLACE SAFETY KEY" to remind the user to put the safety key in its proper place.
▲▼
▲▼
▲▼
▲▼
→
→
→
→
→
→
→
→
→
→
→
→
→
13
