11. WT LOSS:
This program focuses on the lower end of the cardiovascular HR range,
optimizing the HR for weight loss.
12. NUMERIC KEYPAD:
The keypad can be used to input information during the programming stage.
13. CLEAR:
This button will clear inputted data.
14. INCLINE UP/DOWN:
The incline buttons allow control for the elevation of the treadmill. These
buttons also are for selecting USER ID, AGE, WT, TIME inputs for the
electronics during programming. The incline will adjust 1% incline per
increment. The incline range is from 0% to 15%.
15. SPEED UP/DOWN:
The speed buttons control the belt speed. The SPEED UP button also
functions as quickstart. The speed range is from .1 mph to 12 mph; 0.2 kph to
20 kph.
16. STOP/HOLD TO RESET:
a. Pressing the stop button once will stop the treadmill and place the
electronics in a pause mode. At that time the user can then speed up and
resume their workout.
b. If there is no activity or use of the treadmill after 2 minutes, the electronics
will reset to the banner display.
c. Pressing and holding the stop button will reset the electronics to the banner
display of SPORTSART - TR21F.
17. CHANGE / SCAN:
Swap the display information during workout by pressing Change button. The
upper led lights up for Calories, Speed, Time and Distance. The lower led
lights up for Cal/HR, Mets, Pace and Incline. SCAN led lights up for
alternatively showing the upper and lower information per 4 seconds.
14
