4.-1
installed to prevent overturning or lifting of the support elements during normal or foreseeable misuse.
4.-2 While selecting a place to install the equipment, take into account the space requirement
for swinging. Allowing a margin of at least 1.5m on all sides. For this reason,
avoid positioning the equipment near protruding elements, walls, treescape, etc.
4.-3 Once the equipment has been assembled, make sure that it is placed safely
and completely stable, not least under conditons of maximum load.
4.-4 Do not install the equipment inside the sauna or any wet area, because it may cause rusty.
1. This equipment must be assembled and checked by an adult.
2. Regularly check all nuts and bolts for tightness before use and replace any worn,
defective or missing parts. DO NOT try to repaire broken parts.
3. Regularly check swing seat, ropes, steel tube and other parts are tightened completely
and replace worn & damaged parts when necessary.
4. Remove worn and damage parts from use when necessary until replacement parts are fitted.
5. At the beginning of each season, please oil all metallic move parts to maintain
and regularly oil when necessary during the usage season.
6. Baby Swing set placement:
(a) Place this equipment on a level surface at least 1.5 meters from any structure
or obstruction. Such as a fence, garage, house, overhanging branches, laundry
line or electrical wires.
(b) DO not install this equipment over concrete, asphalt or any other hard surface.
(c) Place this equipment on a well-lighted area.
(d) Do not use indoor.
7. Weather condition:
(a) Baby seat should be kept dry--do not use when these parts are wet.
(b) Wind or air movement shall be calm and gentle.
(c) Please do not use when face sun directly to affect visibility or change
orientation to leave sun behind.
(d) Store unit in a shaded area out of direct sunlight when not in use.
8. This item is not designed for adults. Maximum of one child and not to exceed 20kg.
9. Keep equipment clean at all times
10. Please keep these instruction in a safe place for future reference.
11. For any spare part or assembly enquiries, please contact
National Service Centre 1800 465 070
Step 4 Assembling The Ground Anchors
Care and Maintenance
Fix ground anchor Q into the bottom hole of each leg and make sure that the anchor is well
