LS5T 5 Ton Log Splitter
5
IMPORTANT SAFE OPERATION PRACTICES
10. Keep your work area clean. Immediately remove split wood around the machine so you do not trip over it.
11. Do not change the engine governor settings or overspeed the engine. The governor controls the
maximum safe operating speed of the engine.
12. This machine should not be towed on any street, highway or public road.
Maintenance and Storage
1. Stop the engine, disconnect the spark plug and ground it against the engine before cleaning or
inspecting.
2. Stop the engine and relieve hydraulic system pressure before repairing or adjusting fittings, hoses, tubing,
or other system components.
3. To prevent fires, clean debris and chaff from the engine and muffler areas. If the engine is equipped with
a spark arrester muffler, clean and inspect it regularly according to manufacturers’ instructions. Replace if
damaged.
4. Periodically check that all nuts and bolts, hose clamps, and hydraulic fittings are tight to be sure
equipment is in safe working condition.
5. Check all safety guards and shields to be sure they are in the proper position. Never operate with safety
guards, shields, or other protective features removed.
6. The pressure relief valve is preset at the factory. Do not adjust the valve.
7. Never attempt to move this machine over hilly or uneven terrain without a tow vehicle or adequate help.
8. For your safety, replace all damaged or worn parts immediately with original equipment manufacturer’s
(O.E.M.) parts only. “Use of parts which do not meet the original equipment specifications may lead to
improper performance and compromise safety!”
9. Do not alter this machine in any manner, alterations such as attaching a rope or extension to the control
handle, or adding to the width or height of the wedge many result in personal injury.
