background image

  

 

March 2, 2016  

 

 

381-404H WHEELCHAIR SWING 

INSTALLATION INSTRUCTION 

INSTALLATION STEPS CONTIUDE 

__6) 

Attaching Swing Hangers: 

You will need two swing hangers 

(4), two D Shackles (5). Assemble the D-shackles and the 
wheelchair chain to the swing hangers. Attach the swing hangers to 
the top rail. See (Detail C). 

__7) 

Dig footing holes: 

Footing holes may be marked out and dug 

from footing layout; however, it is easier to position swing in 
proper location, mark holes, move swing aside, and dig holes. 

__8) Stand swing upright onto legs and brace in footing holes so 
that 2’ – 3’ of pipe will be under intended level of resilient 
surfacing and the top rail is at desired height. Plumb and level 
entire unit. Tighten all set screws. 

__9) Once the entire playground has been installed and you have 
verified that the entire playground is level you can 

add the 

concrete to the footing holes

.  Be sure to use concrete with a 

minimum 2,500 psi and mix the concrete per the manufacturer’s 
directions before you pour it into the footing hole.  Once the 
footing has been filled with concrete you should rope of the area for 
a minimum of 48 hours to allow the concrete set properly. 

 

 

 

Summary of Contents for 381-404H
































Reviews: