17
ASSEMBLY INSTRUCTIONS
Place the playground equipment on level ground and not less than 6ft(1.8m) from any
structure or obstruction such as a fence, garage, house, overhanging branches,
laundry line, or electrical wires.
Do not install the playground equipment over concrete, asphalt, packed earth, or any
other hard surface; a fall onto a hard surface can result in serious injury or death to
the equipment user.
TIGHTENING NUTS & BOLTS
For ease of installation, do not over-tighten the nuts and bolts initially when you are
starting to assemble the equipment. This will allow for adjustments during installation.
After you have finished assembling the main components of the play set, go back and
fully tighten all nuts and bolts and close all plastic caps. Check the entire unit and
make sure all parts are properly assembled before allowing children to use the
playground equipment.
