background image

 

 

IMPORTANT INSTRUCTIONS AND WARNINGS 

 

 

WARNING 

READ ALL INSTRUCTIONS BEFORE ASSEMBLING OR USING THIS EQUIPMENT 

 

AGE LIMIT 

  This product is designed to be used by up to six(6) children between the ages of 3 to 8.    Maximum user 

weight is 100 pounds (45kg). Combined maximum weight is 600 pounds (272kg). 

  The  play  set  is  designed for  children  over three  (3)  years  old.    Use  by  smaller  children  can  result  in 

entrapment. 

  On-site adult supervision is required at all times for children of all ages.     

  Do  not  allow  use  by  children  with  any  physical  condition  that  may  affect  his/her  ability  to  use  this 

equipment safely. 

 

BEFORE YOU BEGIN 

  Carefully read all instructions in this manual before assembling and using this product.     

  The  unit  must  be  assembled  by  at  least  2  adults.  Heavy  duty  working  gloves  must  be  worn  to  avoid 

injuries during assembly.   

  Children must not use the equipment until it is properly assembled and anchored.     

  Adult supervision is required during the use of this equipment at all times.

 

  Unpack all parts. Take a complete inventory of all parts and hardware using the parts and hardware lists 

in the following pages. If any parts are missing, do not return to the store. Please call customer service 

toll-free number listed on the cover page for assistance. Store the product back in the original box and 

do not begin to install until all parts are obtained.     

 

LOCATION OF PLAY SET 

  The  equipment  must  be  placed  more  than  six(6)  feet(1.8  meter)  from  any  structures  or  obstructions, 

including but not limited to buildings, fence, garage, trees, laundry lines, electrical wires. Children can be 

seriously injured running or swinging into obstacles.     

  The play set must be installed on level ground.    Uneven ground must be leveled prior to installation.   

Installation on sloping or uneven ground will put stress on the joints, causing the unit to become loose 

and unstable which may result in serious injuries. 

  Remove any tripping hazards from the safe play area, such as roots, tree stumps, rocks, landscaping, 

sprinkler heads, railroad ties, plumbing and electrical connections. 

Summary of Contents for MSC-3788-5S-BM


































Reviews: