41
EN
IMPORTANT ELECTRICAL INFORMATION
WARNING:
Dieses Laufband benötigt die richtige Stromquelle, um korrekt zu funktionieren. Zu Ihrer Sicherheit und der
Sicherheit anderer überprüfen Sie bitte, ob die Stromquelle korrekt ist, bevor Sie das Gerät anschließen. Jede
Stromquelle, die über oder unter diesem Wert liegt, kann zu erheblichen Schäden am Gerät und/oder am
Benutzer führen.
GROUNDING METHODS:
This product must be grounded. Grounding provides the least resistance for electrical current and will reduce
the risk of electrical hazards. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances. Ensure that the product is connected to an outlet
which contains the same configuration as the plug. Do not use an adaptor for this product.
This product is only to be used with a correct circuit and a grounding plug that looks like the plug illustrated in
figure A. Make sure that the product is connected to an outlet with the same configuration as the plug. Do not
use an adaptor for this product.
DANGER:
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a
certified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product. If it does not fit the outlet, have a proper outlet installed by an electrician.
WARNING!
1. NEVER use a ground fault circuit interrupter (GFCI) with this treadmill. Keep the power cord away from any
moving parts of the treadmill including the elevation mechanism and the transport wheels.
2. NEVER operate the treadmill using a generator or UPS power supply.
3. NEVER remove any parts without disconnecting the AC power first.
4. NEVER expose the treadmill to rain or moisture. This treadmill is not designed for outdoor use, near pools
or in any other high humidity environment.
FUNCTIONS
SAFETY LOCK FUNCTION:
Removing the Safety Key (No. D07) from the computer console while the treadmill is running will cause it to stop imme-
diately. Once the treadmill reaches a full stop, the window display of the computer will show “- - -“ and the buzzer will
beep 3 times. To start the treadmill again, insert the magnet end of the Safety Key (No. D07) into the computer console
and press the START button.
POWER SAVE FUNCTION:
When the treadmill has been idle for 10 minutes, it will enter the power saving mode. While the treadmill is in
this mode, the computer display will be turned off. Press any button to turn it back on.
POWER ON:
Flick the power switch to „I“ to turn on the treadmill.
AUSSCHALTEN:
Flick the power switch to „O“ to turn the treadmill off at anytime. This includes during exercise.
Summary of Contents for FX300
Page 1: ...FX300 DE EN ES FR IT NL ...
Page 2: ...2 ...
