25
EN
Step 7
Slide the console frame into the main frame
from above as shown in the illustration (19).
Then firmly attach the Console Frame to the
Main Frame (19) below the Handlebar (1) by
tightening it with four screws (10) and four flat
washers (11). Then connect the cables from
sensor A (9) and sensor B (18) to one another.
4
9
1
10
10
11
11
19
18
20
15
Step 8
The pedals (6) & (7) are marked "L" and "R" -
left and right.
Connect them to their respective crank arms.
The right crank arm is on the right side of the
X-bike when you sit on it.
Note that the right pedal must be screwed
clockwise and the left pedal counterclockwise.
7
6
