10106 rev. A
13
STEP 4:
Install the
level 2 position 2
tray using
holes 16” to the right of the level 2 position
1 tray just installed.
Support the weight of the tray while
securing the four (4) 1” long 3/8-16 hex
bolts and washers.
Continue all level 2 tray installations
alternating heights between position 1 and
position 2 trays with a tray every 16”.
NOTE:
If assembling a 6-bike double-
sided or 12-bike double-sided extension
module, there are a quantity of two (2)
level 2 position 1 trays that will be installed
on each side, with a quantity of one (1)
level 2 position 2 tray in the center.
NOTE:
If assembling a double-sided
module, move to the rear of the rack to
install trays using the method described.
Start with lower tier trays, then proceed to
attach the upper tier trays. This will prevent
the risk of hitting your head on upper trays
while completing assembly.
