background image

Safety 

WARNING: 

• Read the Safety Instructions and User Manual thoroughly before using this 

product. All users must fully understand and adhere to these instructions. 

CAUTION: 

• While the product is in operation, be careful not to expose your eyes to the 

emitting laser beam. Exposure to a laser beam for an extended time may be 

hazardous to your eyes. 

CAUTION: 

• Glasses may be supplied in some of the laser tool kits. These are NOT 

certified safety glasses. These glasses are ONLY used to enhance visibility of 

beam in brighter environments or at greater distances from laser source. 

WARNING: 

• The following label/print samples are placed on the product to inform of the 

laser class for your convenience and safety. 

 

• Do not stare directly into the beam or view directly with optical instruments or 

set up the laser at eye level. 

• Do not disassemble the laser tool. There are no user serviceable parts inside. 
• Do not modify the laser in any way. Modifying the tool may result in 

hazardous Laser Radiation Exposure. 

• Do not operate the laser around children or allow children to operate the 

laser. 

Serious eye injury may result. 

• An exposure to the beam of a Class 2 laser is considered safe for a maximum 

of 0.25 seconds. Eyelid reflexes will normally provide adequate protection.

2014 

Summary of Contents for GreenLiner X2 P5









Reviews: