Operation Modes and Setup
General Notes:
• Press to turn laser tool ON; Press and hold for around 2 seconds to turn laser
tool OFF while in any mode.
• Press repeatedly to cycle through the available modes.
Self-leveling Mode
- is enabled when the laser tool is switched to the unlocked position.
- has laser beam(s) blink fast at 2 Hz when tool is out of self-leveling range.
-
allows proper use of tool’s pulse mode with laser detector.
Manual Mode
- is enabled when the pendulum lock is in its locked position to position the
laser tool at various angles to project non-level straight lines or points.
- disables self-leveling operations; Accuracy of the beam(s) is not guaranteed
to be level, and laser beam(s) will blink about every 5 seconds.
Summary of Contents for GreenLiner X2 P5
Page 1: ...Spot On GreenLiner X2 P5 Laser Level USER GUIDE ...
Page 5: ......
