9
3.2 Operations
3.2.1 Set Up (Horizontal Mode)
1. Attach the SRL300 to a tripod that is as level as possible or place on a flat level surface. Make sure that the
SL300 is aligned correctly on the tripod and securely tightened in position or the unit may move during use.
2. Press the Power button to turn the SRL300 on and allow it to begin its leveling process. The Power indicator
light will be shown indicating that the unit is on and operating.
3. Once the SRL300 has completed its self-leveling process the laser will begin to rotate. Please note that the
leveling time can vary based on the angle that the laser is positioned from previous use and any disturbances that
the unit may be sustaining.
4. If the SRL300 is outside of its leveling range the laser beam will flash continuously indicating that it is unable
to level. Please do not stare directly into the laser beam.
