13
5. Detector
To turn the FRD300 REceiver on simply press the power button on the receiver’s control panel. The speaker will
beep once and the screen will turn on indicating that the unit is operating.
The LCD screen on the FRD300 Receiver displays the battery level, detection mode and if the speaker is on or
off.
To change between coarse and fine detection modes simply press the detection mode button on the control panel.
As the laser strikes the FRD300 REceiver sensor the speaker will beep and the LCD screen will display either an
up or down arrow or a level line. If the screen shows either an up or down arrow move the receiver up or down
the staff until the level line has been located. When the level line has been located the speaker will emit a constant
tone.
Detection Mode Symbols:
Coarse:5mm band
Fine:3mm band.
