8
To charge the SRL300, insert the battery charger / power adaptor into the port on the battery pack. The light on
the battery charger /power adaptor has three stages:
- Red (Flashing)
–
Charger and battery are not connected.
- Red (Constant)
–
Battery is charging.
- Green (Constant)
–
Battery is charged.
Notices:
(1) Using the standard rechargeable batteries of the instrument, recharging will be finished
within 8 hours.(4x5000mAh Ni-Mh batteries)
(2) Power required for the charger: Frequency: 50-60HZ; Voltage: 85-265V.
(3) Charging and using of the instrument can progress simultaneously.
(4) If keeping the instrument in storage (or Leave the instrument unused for a long time), the
batteries (dry battery or rechargeable battery) needs to be taken out.
(5) Brand-new rechargeable batteries or long-time unused rechargeable batteries need to be
recharged and discharged three times to attain the capacity required.
