Technical Specifications
Headset Operating Time:
Approx. 7 hours talk time, 120 hrs. Standby
AC / DC Adapter (For Base Unit) Input 100-240V, Output 7.5 VDC 800mA
Telephone connection
Designed for connection to an analog phone line, class
TNV3 (telecommunications network voltage) as defined
by the EN60950 Standard
Rechargeable Battery
3.7VDC/ 320mAh
Replacing the Battery
• Lift up the battery door on the Headset. Gently slide out the battery. You may
have to remove the Ear Cushion from the Headset to have complete access to the
battery door.
• Pull the white connector on the battery gently apart from the white connector in
the Headset.
• Place the new battery in the compartment, with the leads exposed.
• Connect the white connectors. Gently tuck in the wires into the battery compartment.
• Slide the battery door back in place and close the door.
IMPORTANT:
Use only replacement batteries from Spracht. The Headset will not work
and may be damaged if the wrong battery is used. There is even a risk of explosion if
the battery is replaced by an incorrect one.
Dispose of all used batteries correctly. Used equipment and used headset batteries must
be disposed of in compliance with current environmental protection regulations. You
should return them to your reseller or dispose of them at an approved recycling location.
10
EN
Summary of Contents for ZuM DECT 6.0 HEADSET
Page 2: ...Zum DECT 6 0 Headset...
