2
CONTENTS
INTRODUCTION
The Model CW1500A- GunJet
®
is a high-pressure spray gun that offers
exceptional operator control, even at maximum flow and pressure conditions.
A bottom pivot trigger reduces operator fatigue by making trigger pull easier.
The shut-off valve is located in the base of the handle, concentrating heat away
from the operator’s hand and slowing heat build-up. The Model CW1500AW-
incorporates a continuous “Weep” feature to minimize the chance of freezing
and, with the exception of the valve seat sub-assembly, the CW1500A- and
CW1500AW- GunJet spray guns are identical and require the same installation
and operating procedures. The Model CW1500A- and CW1500AW- GunJet
spray guns will accommodate standard Spraying Systems Co. accessories for
both the inlet and the outlet connections, within the accessories pressure and
temperature limitations.
Features of the Model CW1500A Series GunJet spray guns:
•
Operating pressure range — up to 1500 psi (104 bar).
•
Maximum recommended temperature — 300° F (150° C).
•
Forged Brass Inlet Body.
•
Stainless Steel shut-off.
•
PTFE Back-Up Rings.*
•
Viton® O-rings.*
•
Handle design helps to control reactionary force during trigger actuation.
* Viton is a registered trademark of DuPont Performance Elastomers
