4
6.
DO NOT
use damaged, perforated, or weakened fluid hose.
7.
DO NOT
operate a spray gun if there are any leaks from the packings,
fittings, hoses, etc. Fluids which are under high pressure can penetrate
skin, cloth, etc. and cause serious injury.
8.
DO NOT
touch any metal parts of the gun or accessories when
spraying hot liquids or severe injury can occur.
9.
DO NOT
handle a spray gun without a tip or nozzle any differently
than one with a tip or nozzle. Even with the tip or nozzle removed, the
spray gun can discharge a large volume of liquid at a high velocity.
SAFETY SHOULD ALWAYS BE OBSERVED:
1.
DO
use a “two-handed” control of CW1500A- GunJet
®
at all times.
Grasp spray gun firmly with both hands. If an extension is used, grasp
the extension. (Insulated extension if spraying hot liquids).
2.
DO
adopt a secure body stance prior to and during spray operation to
safely control the high reactionary force of this unit
3.
DO
impress on other people in the spraying area the importance of
obeying strict safety precautions for everyone’s safety.
4.
DO
develop a habit of shutting off the power to the pump, relieving
fluid pressure from gun and hose by actuating trigger until all fluid
ceases to flow, and setting the Trigger Lock in the locked position,
before attempting to remove the tip, nozzle, gun or any part of the
gun… or when gun is not in use.
5.
DO
carefully check and tighten threaded connections regularly. Make
them secure and leak proof.
6.
DO
flush fun after each spray period, using the same safety
precautions as used during spraying operations. Always use the lowest
possible pressure of flushing
7.
DO
keep gun clean and dry to allow for positive grip.
8.
DO
use GunJet in a well-ventilated area and make sure spray gun is
grounded properly when used in a possibly explosive or inflammable
environment. A grounded type hose should be used.
IMPORTANT: In case of the slightest appearance of skin penetration from
spray, CONSULT A PHYSICIAN IMMEDIATELY!!
