3
INTRODUCTION
The Model 30A GunJet® is a heavy-duty, impact resistant spray gun with a
sturdy nylon handle and trigger guard. The Model 30A GunJet is a high-
pressure spray gun, which remains responsive and easy to operate even at
maximum flow and capacity conditions. The light trigger pull provides positive
control. The heat resistant handle remains comfortable even at high
temperatures. A special trigger lock feature locks in the “off” position to
prevent accidental discharge and retracts flush into the handle when the gun is
in use. The Model 30AW incorporates a continuous “weep” feature to minimize
the chance of freezing and, except for the valve seat subassembly, the 30A and
30AW GunJet spray guns are identical and require the same installation and
operating procedures. The Model 30A and 30AW GunJet spray guns will
accommodate standard Spraying Systems Co. accessories for both the inlet and
the outlet connections with the accessories’ pressure and temperature
limitations.
Features of the Model 30-GunJet spray guns:
•
Operating pressure range up to 1500 psi (105 bar).
•
Flow capacities to 5 gpm (19 l/min) with 80 psi (5.5 bar) pressure drop.
•
Maximum recommended temperature 200°F (93° C).
•
Single piece, forged brass inlet body.
•
Stainless steel inlet body.
•
Stainless steel shut-off needle.
•
Bronze-filled PTFE valve seat.
•
Buna-N stem seal.
•
Short hand grip (handle to trigger).
