6
MAINTENANCE
With proper care, your Model CU150A-_ _ series GunJet® will give you reliable
service. To maintain this performance, parts should be inspected regularly and
replaced when necessary with genuine Spraying Systems Co. parts.
DISASSEMBLY PROCEDURE:
(SEE FIGURE 1 AND PARTS LIST PLCU150A & PLBCU150A-_ _)
If it becomes necessary to disassemble this unit, follow these steps:
1.
Make sure all electrical and liquid lines to the pump are turned off.
2.
Release all the pressure and liquid (from the hose to GunJet) by
operating Trigger until fluid ceases to flow.
3.
Remove the GunJet from the hose.
4.
Remove Rubber Cover (12) by pulling on its back end until it clears body
(6). Pull the front (orifice) end off of the front of Body (6). This will
expose Orifice Cap (1).
5.
Unscrew and remove Orifice Cap (1)
Summary of Contents for GunJet CU150A
