GENERAL SAFETY INFORMATION
READ AND FOLLOWING INSTRUCTIONS:
WARNING: All safety related and operating instructions
should be read before the nozzle is operated. Follow all
operating instructions. Failure to do so could result in
serious injury.
•
WARNING:
It is important to recognize proper safety
precautions when using a pressurized spray system. Fluids
under pressure can penetrate skin and cause severe injury.
•
WARNING:
When dealing with pressure applications, the
system pressure should never exceed the lowest rated
component. Always know your system and all component
capabilities, maximum pressures and flow rates.
•
WARNING:
Before performing any maintenance, make
sure all liquid supply lines to the machine are shut off and /
or disconnected and chemical/fluid are drained.
•
WARNING:
The use of any chemicals requires careful
control of all worker hygiene.
•
WARNING:
Spraying Systems Co. does not manufacture
or supply any of the chemical components used in this
equipment and is not responsible for their effects. Because
of the large number of chemicals that could be used and
their different chemical reactions, the buyer and user
of this equipment should determine compatibility of the
materials used and any of the potential hazards involved.
•
WARNING:
Spraying Systems Co. strongly recommends
the use of appropriate safety equipment when working
with potentially hazardous chemicals.
•
WARNING:
Before use be sure appropriate connections
are secure and made to withstand weight and reaction
forces of the operating unit.
This equipment includes but is not limited to:
• Protective hat
• Safety glasses or face shield
• Chemical-resistant gloves and apron
• Long sleeve shirt and long pants
NOTE: Always remember to carefully read the chemical
manufacturer’s label and follow all directions.
WARNING: DO NOT USE TO SPRAY FLAMMABLE LIQUIDS–
SUCH USE COULD RESULT IN FIRE OR EXPLOSION CAUSING
BODILY INJURY OR DEATH.
•
WARNING:
It is important to operate equipment within
the temperature range of all components. Also insure that
appropriate time lapses or proper safety equipment is used
when handling components after they’re exposed to high
temperatures.
•
WARNING:
Never operate tank cleaning equipment in the
open due to the potential of bodily injury.
•
WARNING:
Removed equipment from the tank before
attempting any repairs.
•
WARNING:
If walking on top of a tank is deemed safe and
is necessary, use proper safety precautions to protect
individuals as well as the equipment.
•
WARNING:
Do not put any part of your body in the tank
during operation of the tank cleaner. This is NOT a safe
procedure for verification of operation.
•
WARNING:
Proper hoisting procedures should be used
when installing and removing all equipment.
•
WARNING:
To insure the safety of the equipment as well
the individuals using them, only use Spraying Systems Co.
components.
•
WARNING:
When packaging and transporting use
structurally sound boxes or crates that can handle the
weight of the equipment.
•
WARNING:
Tank cleaners should be flushed out with clean
water before they’re stored or shipped to minimize health
hazards or cross contamination.
•
WARNING:
Do not use any equipment outside the intended
purposes of the product. Misuse can result in personal
injury or product damage.
The container being cleaned should be sealed as best as
possible while the TankJet 9 models is running its cycle. The
combination of temperature, cleaning solution, spray impact
and the potential toxic materials being cleaned can cause a
hazard to anyone in the path of the spray.
TECHNICAL SPECIFICATIONS
Specifications
Aplication:
Cleaning the inside of containers such as drums, barrels
and tanks
Features:
The nozzles will fit through model:
A: 1-1/16" (27 mm) diameter hole
B: 1-3/8" (35 mm) diameter hole
C: 1-5/8" (42 mm) diameter hole
Reactionary force produced by the sprays rotates the
spray head providing 360° coverage.
Temperature:
Max.operating temp is 190°F (88°C)
Pressure:
Max operating pressure is 100 psi (7 bar)
Flow:
A: 1.3-5 gpm (4.9-18.9 lpm)
B: 5-17 gpm (18.9-64.3 lpm)
C: 12-38 gpm (45.4-143.8 lpm)
Material:
316 SS, thermoplastic bearings
Weight:
A: 0.34 lbs. (0.15 kg.)
B: 0.58 lbs. (0.26 kg.)
C: 0.96 lbs. (0.44 kg.)
2
spray.com | 1.800.95.SPRAY | Intl. Tel: 1.630.665.5000
