10
TJM60AG
T
ank
Cleaner
ǀ
08/07/2017
Ball Valve (water line) and trigger
valve (air line) in ON postion
Ball Valve with
handle in OFF
position
Make sure ball valve is in OFF position
for water line whenever nozzle head of
tank cleaner is outside of tank
Step 2 .
Once, tank cleaner nozzle head is in tank, the tank
cleaner can be used for tank washing operation. First,
turn the handle on the ball valve to the on position and
then ajdust the water pressue regulator and temperature
setting on the pressure washer pump. The maximun
allowable water pressure is 1,000 psi (70 bar) at a
maximum water temperature of 180°F (82°C). Next, turn
on the air line by squeezing and locking the trigger in
place to drive the air motor to actuate rotational motion
of the nozzle head. The barrel washer is now cleanining
the inside surfaces of the barrel. Once the cleaning cycle
is completed shut off the ball valve on the water line and
then shut off the air line by closing the the trigger valve.
Once the ball valve and trigger valve are closed the tank
cleaner can be removed from the tank .
Step 3 .
WARNING! Never operate tank cleaner with
nozzle head outside of tank.
Make sure ball valve
is in off position for water line whenever nozzle head of
tank cleaner is outside of tank. Please see below drawing
with ball valve in off position .
