Spraying Systems Co TeeJet BOOMPILOT, Installation Manual

Copyrights

© 2013 TeeJet Technologies. All rights reserved. No part of this document or the computer programs described in it may be reproduced, 

copied, photocopied, translated, or reduced in any form or by any means, electronic or machine readable, recording or otherwise, without 

prior written consent from TeeJet Technologies.

Trademarks

Unless otherwise noted, all other brand or product names are trademarks or registered trademarks of their respective companies or 

organizations.

Limitation of liability

TEEJET TECHNOLOGIES PROVIDES THIS MATERIAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR 

IMPLIED. NO COPYRIGHT LIABILITY OR PATENT IS ASSUMED. IN NO EVENT SHALL TEEJET TECHNOLOGIES BE LIABLE FOR ANY 

LOSS OF BUSINESS, LOSS OF PROFIT, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT, SPECIAL, 

INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND, EVEN IF TEEJET TECHNOLOGIES HAS BEEN ADVISED OF SUCH 

DAMAGES ARISING FROM TEEJET TECHNOLOGIES SOFTWARE.

Safety information

TeeJet Technologies is not responsible for damage or physical harm caused by failure to adhere to the following safety 

requirements.

As the operator of the vehicle, you are responsible for its safe operation.
The BoomPilot is not designed to replace the vehicle’s operator.
Do not leave a vehicle while the BoomPilot is engaged.
Be sure that the area around the vehicle is clear of people and obstacles before and during engagement.
The BoomPilot is designed to support and improve efficiency while working in the field. The driver has full responsibility for the quality and 

work related results.
Disengage BoomPilot before operating on public roads or when not in use to prevent loss of vehicle control.