___________________1. Safety Data
2.0 Installation
When carrying out installation and
maintenance work there is a higher risk of
injury. It is important that you familiarise
yourself with the machine and read the
Operating Instructions beforehand.
Operator instruction and initial installation
of the machine are carried out by our
service technicians or authorised
distributors.
The machine must not be used in any way
beforehand! The machine can only be
released for operation after instructions
have been provided by our service
technicians or authorised distributors.
• If any modules or parts have been
removed for transportation, these shall be
mounted by our service technicians/
authorised dealers before the instruction
takes place.
• Check all important screw connections!
• Lubricate all nipples and joints!
• Check all hydraulic connections and lines
for damage.
2.1 Attachment
The unit is attached to the loader by the
lifting eyes at the end nearest the
hydraulic controller.
Position the Loader facing the rear of the
Spread-A-Bale and by a combination of
driving forward and using the boom
controls attach the Spread-A-Bale in
accordance with the Loader instructions,
ensuring that the locking mechanism is
correctly in place before moving off.
Once the unit has been attached and
before any lifting takes place the
hydraulics need to be connected with the
engine switched off and the key removed.
Ensure that the couplings are clean prior
to connection.
c
Fig. 2.01: Attachment
