Automatic support generation
Adding a proper support structure is an essential part of preventing failed prints. Minimize
supports by positioning your object to have as few overhanging surfaces as possible.
You don’t need supports to print this keychain when you have the flat side down.
Try adding and removing supports
with your piece at various angles to
see where they generate.
Strength/Thickness
: The diameter of
each support, from low (thinnest) to
high (thickest).
Density
: Adjusts the number of
supports per square millimeter.
Print your model
When you're ready to print your model(s), click the MoonRay button on the middle of the
right side of the screen. You have a few options to select before printing.
Printer
: If you have multiple MoonRay
3D printers connected, you can select
the machine for the specific print job
here.
Material
: Select the type of resin you
will be using to print your model. It is
very important you make the correct
selection.
Resolution
: You have three options for
layer thickness, each in microns. As
layer thickness increases, print time
and detail level decrease. For most
models, we recommend printing using
the "50" or "100" settings.
