1
Chapter 1 Characteristics and Specification
1.1 Printing specification
● Printing method: direct thermal
● Printing paper width: 57.5±0.5mm
● Printing density: 8 dots/mm, 384 dots/line
● Printing speed: approx. 60mm/s (valid content per line isn’t over 25%)
● Reliability:
Printing head life span:50km
Operating Conditions:
*
Print 12 × 24 ASCII characters, 50 lines every time, intermittent and repeated
*
Each dot-line printing at the same time should not exceed 25%, for each
character-line’s one dot, vertical and repeated printing can not exceed 11 times
*
Use specified thermal paper
● Effective printing width: 48mm
1.2 Printing Paper
● Paper Type: General Thermal Paper 57.5xΦ60 mm
(
MAX
)
● Paper Thickness
---
0.06-0.08mm
● Paper Installation: Drop-in Easy Loading
● Paper Cutting Method: Manual
1.3 Printing Font
● ANK Character set:
12×24 dots, 1.5
(
W
)
× 3.00
(
H
)
mm;
● GB2312-80(Chinese):
24×24 dots, 3.00
(
W
)
× 3.00
(
H
)
mm.
1.4 Interface
● USB interface: