Other Schedule types
Basic Schedule
-
This is an automatic schedule with specific times on specific
days set by the user.
2.
Enter specific times for each day
3.
Time
-
Specific time, or offset from Sunset or Sunrise
4.
Weather adjustments
•
Climate Adjust
-
Adjust water times based on weather
•
Rain Delay
-
Delay based on forecasted and received rainfall
•
Rain Sensor
-
Delay when wired rain sensor is active
Manual Schedule
-
This is a schedule that must be initiated by the user.
2.
Enter specific times for each day
Basic and manual schedules are similar schedules that use specific times entered.
The Basic schedule is an automatic schedule, while the Manual schedule can only be
started from the app or a 3rd party integration.
1.
Go to
“
Schedules
”
then select
to add a new schedule
+
Save and enable the schedule
Add Wireless Devices
The Spruce controller uses a mesh wireless network to
connect with Spruce Soil Moisture sensors and other
devices. The wireless protocol uses the 802.15.4 stand-
ard and can connect with specific Zigbee devices. Most
Zigbee plug
-
in outlets will connect and can be used to
extend the range of the sensor network. Additional
information can be found at:
support.spruceirrigation.com
1.
Go to
“
Add Device
”
or the Devices page from the
upper left drop down menu. Select sensor to start
the wizard to add a new sensor or outlet
2.
The controller will flash red indicating it is searching
for devices
3.
Follow the instructions provided with the device to
initiate and complete the pairing process
4.
The wizard will indicate when the device has been
added successfully. It is now ready for use in sched-
ules or analytics
+
