4
HOW DOES IT WORK
The humidifier draws dry air through the intake grill area. This air is then
passed through a moisture-laden wick filter, which retains the minerals and
deposits in the water. The resulting moist air is directed back into the room
from the top air outlet.
NOTE: this humidification system provides a cool, invisible moisture output. It is
normal not to see the mist.
NOTE: a humidity level below 20% can be unhealthy and uncomfortable. The
recommended humidity level is between 40%-60%.
Parts Identification
Operating Instructions
1. Remove the tank and the main body.
2. Make sure the wick filter is in place.
3. Bring the tank to the sink, turn upside down and remove tank cap by turning
counter-clockwise. Fill with cool, fresh tap water. DO NOT fill with warm
water as this may cause leaking. Replace the cap FIRMLY.
4. Replace the main body and tank. The tank will immediately begin to empty
into the base.
5. Plug the humidifier into a 120V ~ electrical outlet, Power Indicator will
illuminate.
Note: When the tank runs out of water, the unit will continue to operate
as a fan with no humidification (there is no harm to the unit when water
is out).
