10
ergy being used and provide better temperature control. In addition, it
reduces the mechanical and electrical stress on the motor and mechanical
equipment. Electrical savings can be large during periods of low ambient
temperature when the cooling requirement can be satisfied at reduced
speeds. To benefit from these advantages, it is important that the drive
be installed correctly.
Marley supplies VFD and VFD controls specifically designed for our cooling
products. If you have purchased a Marley VFD and/or controls package,
please follow the instructions in the
User Manual
for that system. Most
VFD problems can be avoided by purchasing the Marley drive system. If
you are installing a VFD other than the Marley drive, please refer to that
drives installation manual.
Improper use of a VFD may cause damage to equipment or personal
injury. Failure to correctly install the VFD drive will automatically void
all warranties associated with the motor and any equipment that is
either electrically or mechanically (directly) attached to the VFD drive
system. The length of this warranty avoidance will be contingent on
properly installing the VFD system and repairing any damage that may
have occurred during its operation. SPX Cooling Technologies does
not assume responsibility for any technical support or damages for
problems associate with non-Marley brand VFD systems.
Changing the operational fan speed from the factory settings could
cause the fan to operate in an unstable region which may result in
damage to the equipment and possible injury.
Mechanical Equipment:
Always shut off electrical power to the tower fan motor prior to
performing any maintenance on the tower. Any electrical switches
should be locked out and tagged out to prevent others from turning
the power back on.
1. Install AV61000 and AV62000 fan guard according to the installation
drawing shipped with the tower. The fan guard on other models is
factory installed.
2. Spin the fan manually to assure that all fan blades properly clear the
inside of the fan cylinder. Observe the action of the sheaves and belt(s)
to be sure that the motor is properly aligned with the fan sheave. If
Warning
Warning
Warning
Installation
Summary of Contents for MARLEY AV 98-1514E
Page 1: ... Marley AV CoolingTower User Manual 98 1514E ...
Page 31: ......
